Floor tiles

Cement layer

Soundproofing mat

Soundproofing Panel

Soundproofing Cotton

Damping Brick

Ground

Damping Soundproofing Mat

Damping Soundproofing Panel

Card-type keel

Glass Wool Board

Ceiling Shock Absorber

1. The ground is covered with a layer of shock-absorbing mats

2. A layer of high-density soundproof cotton is laid on the shock-absorbing mats

3. Place a shock-absorbing brick every 60cm, using a utility knife to cut holes and fill them with soundproof cotton

4. Lay a layer of soundproof boards

5. A layer of soundproof felt is laid on top of the soundproof boards

6. A layer of cement is laid on the soundproof felt, followed by floor tiles

1. Lay a layer of soundproofing felt on the ceiling and fix it with steel nails

2. Install ceiling shock absorbers, spaced 60cm apart, fixed with expansion screws

3. Install main keel, spaced 60cm apart

4. Fill with glass wool boards

5. Install secondary keel, spaced 40cm apart

6. Seal with damping soundproof panels

7. Install main keel, spaced 60cm apart

8. Fill with glass wool boards

9. Install secondary keel, spaced 40cm apart

10. Seal with damping soundproof panels

11. Seal with damping structural adhesive

1. Lay a layer of soundproofing mat on the wall and fix it with steel nails.

2. Install wall dampers, spaced 60cm apart, fixed with expansion screws.

3. Install main keel, spaced 60cm apart.

4. Fill with glass wool boards.

5. Install auxiliary keel, spaced 40cm apart.

6. Seal with damping soundproof panels.

7. Install main keel, spaced 60cm apart:

8. Fill with glass wool boards;

9. Install auxiliary keel, spaced 40cm apart;

10. Seal with damping soundproof panels;

11. Seal with damping structural adhesive:

Damping Pad